S-Felt T-300
S-Felt T-300 is a separation-, levelling- and protection layer made of polyester (PES).
- Bitumen resistant
- Non decaying
- Suitable for mechanical fastening (drill proved)
- Recyclable
Usage
S-Felt T-300 is used as a separation and levelling layer between Sarnafil® or Sikaplan® membranes and incompatible substrates. S-Felt T-300 can also be used as a protection layer between Sarnafil® or Sikaplan® membranes and any protective topping or pavement.Advantages
- Bitumen resistant
- Non decaying
- Suitable for mechanical fastening (drill proved)
- Recyclable
Packaging
S-Felt T-300 rolls are wrapped individually in transparant PE-foil.
| Packing unit | see price list |
| Roll length | 50.00 m |
| Roll width | 2.00 m |
| Roll weight | 30.00 kg |
Colour
| Surface | structured |
| Colour | white |
Product Details
APPROVALS / STANDARDS
- Reaction to fire according to EN 13501-1.
- Quality management system EN ISO 9001/14001.
Chemical Base
100 % PES fibres
Shelf Life
5 years from date of production and according to defined storage conditions in unopened, undamaged, original packaging.
Storage Conditions
Rolls must be stored between +5 °C and +30 °C, protected from direct sunlight, rain and snow. Do not stack pallets of rolls or any other material during transport or storage.
Length
50.00 m
Width
2.00 m (+/- 10 %)
Effective Thickness
| 2.50 mm (+/- 10 %) | (EN 29073-2) |
Mass per unit area
| 300 g/m2 (+/- 10 %) | (EN 29073-1) |
System Structure
| Ancillary products | Sarnacol®-2170 Sarnacol® T-660 |
| Compatible products | All types of Sarnafil® and Sikaplan® membranes |
Tensile Strength
| longitudinal | ≥ 300 N/50 mm |
| transversal | ≥ 350 N/50 mm |
Elongation
| longitudinal | ≤ 90 % |
| transversal | ≤ 90 % |
Reaction to Fire
| Freely suspend | E-d2 |
| On polystyrene board | E |
| On wood | E |
| On concrete | E |
Application
Ambient Air Temperature
-20 °C min. / +60 °C max.
Substrate Temperature
-30 °C min. / +60 °C max.
APPLICATION
Installation works must be carried out only by Sika instructed contractors for roofing.
Installation of some ancillary products, e.g. contact adhesives / cleaners is limited to temperatures above +5 °C. Please observe information given by Product Data Sheets.
Special measures may be compulsory for installation below +5 °C ambient temperature due to safety requirements in accordance with national regulations.