Product Data Sheet Show all documents

S-Felt T-300

Separation - levelling - and protection layer

S-Felt T-300 is a separation, levelling and protection layer made of polyester (PES).

  • Bitumen resistant
  • Non decaying
  • Suitable for mechanical fastening (drill proved)
  • Recyclable
Product Data Sheet Show all documents

Usage

S-Felt T-300 is used as a separation and levelling layer between Sika Liquid Plastics liquid applied membrane and incompatible substrates. S-Felt T-300 can also be used as a protection layer between Sika Liquid Plastics liquid applied membranes and any protective topping or pavement.  

Advantages

  • Bitumen resistant
  • Non decaying
  • Suitable for mechanical fastening (drill proved)
  • Recyclable

Packaging

S-Felt T-300 rolls are wrapped individually in transparant PE-foil.

Packing unitsee price list
Roll length50 metres
Roll width2 metres
Roll weight30kg

Colour

Surface

structured

Colour

white

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Reaction to fire according to EN 13501-1
  • Quality management system EN ISO 9001/14001
Product Information

Chemical Base

100% PES fibres

Shelf Life

5 years from date of production and according to defined storage conditions in unopened, undamaged, original packaging.

Storage Conditions

Rolls must be stored between +5 °C and +30 °C, protected from direct sunlight, rain and snow.  Do not stack pallets of rolls or any other material during transport or storage.

Length

50 metres

Width

2 metres (+/- 10%)

Effective Thickness

2.50mm (+/- 10 %)

(EN 29073-2)

Mass per unit area

300g/m2  (+/- 10 %)

(EN 29073-1)
System information

System Structure

Compatible products

All types of Sika Liquid Plastics liquid applied membranes
Technical Information

Tensile Strength

Longitudinal 

≥ 300 N/50mm

Transversal 

≥ 350 N/50mm

Elongation

Longitudinal

≤ 90%

Transversal

≤ 90%

Reaction to Fire

Freely suspend

E-d2

On polystyrene board

E

On wood

E

On concreteE

Application

Application Information

Ambient Air Temperature

 -20 °C min. / +60 °C max.

Substrate Temperature

-30 °C min. / +60 °C max.
Application steps

APPLICATION

Installation works must be carried out only by Sika Liquid Plastics instructed contractors for liquid applied membranes. Installation of some ancillary products, e.g. contact adhesives/cleaners is limited to temperatures above +5 °C.  Please observe information given by Product Data Sheets. Special measures may be compulsory for installation below +5 °C ambient temperature due to safety requirements in accordance with national regulations.

Documents